Country Classic Partial Arch 2 Rail Gate

Materials & Specs

Frame, Rails and Pickets

    • Top rail is 2”x 1.5” – 14 gauge plain rectangular metal tubing.
    • Bottom rail is 2”x 2” – 14 gauge galvanized square metal tubing.
    • Latch end upright is 2”x 2” – 14 gauge galvanized square metal tubing.
    • Hinge end upright is 2”x 2” – 11 gauge galvanized square metal tubing.
    • Vertical pickets are 1”x 1” – 16 gauge galvanized square metal tubing – evenly spaced between 5” and 5.5” apart.

Cut Outs and Medallions

    • Decorative cut outs are plain steel and at least 1/8” thick

Exterior and Coating

    • Gates are sandblasted after fabrication to completely clean the material and roughen the surface so that the powder coating has some “tooth” to bond to. A zinc undercoat is then applied and baked on as a rust inhibitor for the welds and any of the plain metal used in fabrication. This is followed by the finish color powder coat which is also baked on resulting in a durable, rust resistant finish.


Country Classic Partial Arch 2 Rail Star Gate

Materials & Specs

Frame, Rails and Pickets

    • Top rail is 2”x 1.5” – 14 gauge plain rectangular metal tubing.
    • Bottom rail is 2”x 2” – 14 gauge galvanized square metal tubing.
    • Latch end upright is 2”x 2” – 14 gauge galvanized square metal tubing.
    • Hinge end upright is 2”x 2” – 11 gauge galvanized square metal tubing.
    • Vertical pickets are 1”x 1” – 16 gauge galvanized square metal tubing – evenly spaced between 5” and 5.5” apart.

Cut Outs and Medallions

    • Decorative cut outs are plain steel and at least 1/8” thick

Exterior and Coating

    • Gates are sandblasted after fabrication to completely clean the material and roughen the surface so that the powder coating has some “tooth” to bond to. A zinc undercoat is then applied and baked on as a rust inhibitor for the welds and any of the plain metal used in fabrication. This is followed by the finish color powder coat which is also baked on resulting in a durable, rust resistant finish.


Country Classic Partial Arch 4 Rail Gate

Materials & Specs

Frame, Rails and Pickets

    • Top rail is 2”x 1.5” – 14 gauge plain rectangular metal tubing.
    • Bottom rail is 2”x 2” – 14 gauge galvanized square metal tubing.
    • Interior rails are 1”x 1” – 14 gauge galvanized square metal tubing.
    • Latch end upright is 2”x 2” – 14 gauge galvanized square metal tubing.
    • Hinge end upright is 2”x 2” – 11 gauge galvanized square metal tubing.
    • Vertical pickets are 1”x 1” – 16 gauge galvanized square metal tubing – evenly spaced between 5” and 5.5” apart.

Cut Outs and Medallions

    • Decorative cut outs are plain steel and at least 1/8” thick

Exterior and Coating

    • Gates are sandblasted after fabrication to completely clean the material and roughen the surface so that the powder coating has some “tooth” to bond to. A zinc undercoat is then applied and baked on as a rust inhibitor for the welds and any of the plain metal used in fabrication. This is followed by the finish color powder coat which is also baked on resulting in a durable, rust resistant finish.


Country Classic 4 Rail Star Gate

Materials & Specs

Frame, Rails and Pickets

    • Top rail is 2”x 1.5” – 14 gauge plain rectangular metal tubing.
    • Bottom rail is 2”x 2” – 14 gauge galvanized square metal tubing.
    • Interior rails are 1”x 1” – 14 gauge galvanized square metal tubing.
    • Latch end upright is 2”x 2” – 14 gauge galvanized square metal tubing.
    • Hinge end upright is 2”x 2” – 11 gauge galvanized square metal tubing.
    • Vertical pickets are 1”x 1” – 16 gauge galvanized square metal tubing – evenly spaced between 5” and 5.5” apart.

Cut Outs and Medallions

    • Decorative cut outs are plain steel and at least 1/8” thick

Exterior and Coating

    • Gates are sandblasted after fabrication to completely clean the material and roughen the surface so that the powder coating has some “tooth” to bond to. A zinc undercoat is then applied and baked on as a rust inhibitor for the welds and any of the plain metal used in fabrication. This is followed by the finish color powder coat which is also baked on resulting in a durable, rust resistant finish.


Country Classic Partial Arch 4 Rall All Star Gatre

Materials & Specs

Frame, Rails and Pickets

    • Top rail is 2”x 1.5” – 14 gauge plain rectangular metal tubing.
    • Bottom rail is 2”x 2” – 14 gauge galvanized square metal tubing.
    • Top interior rail is 2”x 1.5” – 14 gauge plain rectangular metal tubing.
    • Bottom interior rail is 1”x 1” – 14 gauge galvanized square metal tubing.
    • Latch end upright is 2”x 2” – 14 gauge galvanized square metal tubing.
    • Hinge end upright is 2”x 2” – 11 gauge galvanized square metal tubing.
    • Vertical pickets are 1”x 1” – 16 gauge galvanized square metal tubing – evenly spaced between 5” and 5.5” apart.

Cut Outs and Medallions

    • Decorative cut outs are plain steel and at least 1/8” thick

Exterior and Coating

    • Gates are sandblasted after fabrication to completely clean the material and roughen the surface so that the powder coating has some “tooth” to bond to. A zinc undercoat is then applied and baked on as a rust inhibitor for the welds and any of the plain metal used in fabrication. This is followed by the finish color powder coat which is also baked on resulting in a durable, rust resistant finish.